VigorSwitch G1282

28-Port Web Smart Gigabit Switch

OVERVIEW

DrayTek VigorSwitch G1282 is a Web Smart Gigabit switch. It has 24x GbE ports and 4x GbE/SFP combo ports.

Equipped with enterprise-level features, including IP Conflict Detection & Prevention, ONVIF Surveillance, and ping watchdog, VigorSwitch G1282 is a managed switch that brings network security and stability into mid-sized environments.

24x PoE GbE
PoE/PoE+ Gigabit Ethernet, RJ-45

4x GbE/SFP
Gigabit Ethernet, RJ-45/SFP Combo

4.2 Mbit
Buffer Size

56 Gbps
Switching Capacity

Power Socket
LED Indicator

Reset Button
24x PoE/PoE+ Gigabit Ethernet

4x Gigabit Ethernet/SFP Combo

Key Features

Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
ONVIF-Friendly

Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more

Web-Based GUI
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Central Switch Management
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Energy-Efficient Ethernet

Compliant with IEEE 802.3az to reduce power consumption.

ONVIF-Friendly

Recognize the ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance.

Centralized Hierarchical View

VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.

Images Viewing

Images filmed by IP cameras can be viewed directly on VigorSwitch.

Device Management

Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.

ONVIF Snapshot Alert

Locating Not-Responding Cameras Made Easy

It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.

To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.

With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.

IP Conflict Detection & Prevention

Conflict Detection

Keep an eye on the environment and notify the administrator of any IP conflicts.

Conflict Prevention

For a more stable network, VigorSwitch can’t only detect but block the misconfigured or malicious IP host.

SPECIFICATIONS

Interface
LAN Port	24x 10/100/1000 Mbps Gigabit Ethernet, RJ-45 4x Gigabit Ethernet/SFP Combo
Button	1x Factory Reset Button
Capacity
Buffer Size	4.2 Mbit
Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps (64 bytes)
MAC Address Table	8K
Jumbo Frame	Up to 9KB
Networking Standards
IP Version	IPv4, IPv6
Ethernet Standards	802.3 10Base-T 802.3u 100Base-T 802.3ab 1000Base-T 802.1q Tag-based VLAN 802.3x Flow Control 802.3 Auto-Negotiation 802.1p Class of Service 802.1d STP 802.1w RSTP 802.3ad LACP 802.1AB LLDP 802.3az EEE
VLAN
Max.Number of VLAN	256
VLAN Type	802.1q Tag-based MAC-based Management VLAN Voice VLAN Surveillance VLAN
Port Isolation
ONVIF Surveillance
Discovery
Surveillance Topology
Real-Time Video Streaming
ONVIF Device Maintenance	Device Info, Reset Factory Default, Time Settings, Reboot
QoS
Number of QoS Queues	8
Queue Scheduling	SPQ, WRR
CoS (Class of Service)	802.1p CoS, DSCP, CoS-DSCP, IP Precedence
Rate Limit/Shaping
Security
Access Control List	MAC, IPv4, IPv6
Storm Control	Broadcast, Unknown Multicast, Unknown Unicast
DoS Defense
IP Source Guard
IP Conflict Detection
IP Conflict Prevention
Loop Protection
Link Aggregation
Max. Number of Group	8
Max. Number of Member in Each Group	8
Type	Static, LACP
Traffic Load Balancing	MAC Address, IP/MAC Address
Multicast
IGMP Snooping	v2, v3 (BISS)
IGMP Querier
Management
Web Interface	HTTP, HTTPS
Command Line Interface	Telnet, SSH v2
OpenVPN Client	Certificate-based authentication
SNMP	v1, v2c, v3
Mail Alert	Port Status, Port Speed, System Restart, IP Conflict
LLDP
Syslog
2-Level Admin Privilege
Multiple Admin Accounts
Managed by VigorRouter SWM
Managed by VigorConnect
Managed by VigorACS
Config File Export/Import
SNTP (Simple Network Time Protocol)
Diagnostics Tools	Port Mirroring, Ping, Cable Test
Physical
19-inch Rack Mountable	Mouting Kit Included
Power Input	AC 100-240V @ 0.7A
Max. Power Consumption	36 watts
Dimension	440mm x 205.3mm x 44mm
Weight	2.8 kg (6 lb)
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 70°C
Operating Humidity	10 to 90% non-condensing
Storage Humidity	5 to 90% non-condensing
Certificate

Notes :

All specifications are subject to change without notice.
The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.

Resources

VigorSwitch G1282 Datasheet

LAN Management

DrayTek provides an all-in-one management platform for Vigor devices on the LAN side.

Automatic Device Discovery

All you need is connect the VigorSwitch to the LAN side of the router, Vigor Router will then discover the devices to be managed.

Provisioning

Switch profile may be set on the Vigor Router. VLAN and scheduled ports control may be set and provision to the VigorSwitch remotely.

Monitoring

VigorRouter provides a hierarchical centralized view of managing devices, you may always check if the managed VigorSwitch is online and if there’s log and alert happens.

System Maintenance

You may perform a factory reset, save/restore a configuration backup, or trigger a remote reboot directly on the VigorRouter. There’s no need to log in to each device’s management page.