VigorSwitch PQ2200xb

Full 2.5GbE L2+ Managed Switch with PoE++

DrayTek VigorSwitch PQ2200xb features 2.5GbE ports for LAN and 10G SFP+ for uplink/downlink. Together with WiFi6 VigorAPs (e.g., VigorAP 1060C), VigorSwitch PQ2200xb brings the full WiFi 6 performance to LAN clients.

VigorSwitch PQ2200xb has 4 PoE++ ports providing up to 90W per port and 12 PoE+ ports. With total 400W output, it is ideal for more IoT applications integration, including LED lighting, POS (point of sale) computer, motion sensors, IP Cam,…etc.

Supporting advanced Layer 3 features, DHCP Server, and VLAN Routing, VigorSwitch PQ2200xb improves network efficiency and helps your LAN network to work continuously even when the gateway is offline, which is ideal to be placed as the core switch in SME/SMB.

  • 90W PoE++ & 30W PoE+

    4x PoE++ & 12x PoE+, 400W Total

  • 16x 2.5GbE

    16x 10M/100M/1G/2.5GbE

  • 4x 10G SFP+

    1G/10G SFP+

  • 160 Gbps

    Switching Capacity

  • Power Socket
  • LED Indicator
  • Reset Button
  • Console Port
  • 4x PoE++ 2.5GbE
  • 12x PoE+ 2.5GbE
  • 4x SFP+ Ports

Key Features

  • null

    PoE++ (802.3bt)

    Deliver up to 90W over one Ethernet cable. Turn on/off the PoE device periodically with PoE Schedule.

  • null

    Ping Device Check

    Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.

  • null

    2.5GbE

    Provides higher performance to WiFi 6 AP and other Ethernet devices.

  • null

    10G SFP+

    Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.

  • null

    Wire-Speed VLAN Routing

    Improve overall network performance by using VigorSwitch PQ2200xb to route the inter-VLAN traffic directly and offload the router.

  • null

    Auto Surveillance & Voice VLAN

    Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.

  • null

    IP Conflict Prevention

    Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more

  • null

    QoS (Quality of Service)

    Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.

  • null

    ONVIF-Friendly

    Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more

  • null

    IPv6 Ready

    VigorSwitch PQ2200xb supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.

  • null

    Web-Based GUI

    Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo

  • null

    Multiple Admin Accounts

    Multiple Admin accounts with two levels of administrator privilege.

  • null

    Central Switch Management

    Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more

ONVIF-Friendly

 

Recognize the ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance.

Centralized Hierarchical View

VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.

Images Viewing

Images filmed by IP cameras can be viewed directly on VigorSwitch.

Device Management

Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.

ONVIF Snapshot Alert

Locating Not-Responding Cameras Made Easy

It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.

To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.

With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.

IP Conflict Detection & Prevention

Conflict Detection

Keep an eye on the environment and notify the administrator of any IP conflicts.

Conflict Prevention

For a more stable network, VigorSwitch can’t only detect but block the misconfigured or malicious IP host.

Device Check

Ping Check for LAN Devices

VigorSwitch keeps pinging on the LAN devices. Once the device stops responding to the ping, PoE cycle a port (PoE model only) or send email alert.

Interface
LAN Port 16x 10/100/1000/2500Mbps Ethernet, RJ-45

4x 1000Mbps/10Gbps SFP+ slot

Console Port 1x RJ-45
Button 1x Factory Reset Button
PoE
PoE Capable Ports 4x PoE/PoE+/PoE++ (802.3af/at/bt), up to 90W per port, Type mode A

12x PoE/PoE+ (802.3af/at), up to 30W per port, Type mode A

PoE Power Budget 400 watts
Power Limit
Scheduled On/Off
Power Cycle on Port Manual, Auto by Ping check timeout
Capacity
Buffer Size 12 Mbit
Switching Capacity 160 Gbps
Forwarding Rate 119.04 Mpps (64 bytes)
MAC Address Table 16k
Jumbo Frame Up to 10 KB
L3 Routing Table 6k static route + 512 prefix route
Networking Standards
IP Version IPv4, IPv6
Ethernet Standards 802.3af PoE

802.3at PoE+

802.3bt PoE++

802.3 10Base-T

802.3u 100Base-T

802.3ab 1000Base-T

802.3bz 2.5GBase-T

802.3ae 10GBase-X

802.3x Flow Control

802.3 Auto-Negotiation

802.1q Tag-based VLAN

802.1p Class of Service

802.1d STP

802.1w RSTP

802.1s MSTP

802.3ad LACP

802.1ad QinQ

802.1x Port Access Control

802.1AB LLDP

802.3az EEE

VLAN
Max.Number of VLAN 256
VLAN Type 802.1q Tag-based
MAC-based
Protocol-Based
Management VLAN
Voice VLAN
Surveillance VLAN
802.1x Guest VLAN
Port Isolation
GVRP
Q-in-Q Basic
ONVIF Surveillance
Discovery
Surveillance Topology
Real-Time Video Streaming
ONVIF Device Maintenance Device Info, Reset Factory Default, Time Settings, Reboot
QoS
Number of QoS Queues 8
Queue Scheduling SPQ, WRR
CoS (Class of Service) 802.1p CoS, DSCP, CoS-DSCP, IP Precedence
Rate Limit & Shaping
Security
Access Control List MAC, IPv4, IPv6
Storm Control Broadcast, Unknown Multicast, Unknown Unicast
DoS Defense
802.1x Port Access Control
IP Source Guard
IP Conflict Detection
IP Conflict Prevention
Loop Protection
Dynamic ARP Inspection
DHCP Snooping with Option 82
Link Aggregation
Max. Number of Group 8
Max. Number of Member in Each Group 8
Type Static, LACP
Traffic Load Balancing MAC Address, IP/MAC Address
Multicast
IGMP Snooping v2, v3 (BISS)
IGMP Querier
MLD Snooping v1, v2 (Basic)
Max. Number of Multicast Group 256
Group Throttling
Group Filtering
MVR (Multicast VLAN Registration)
Layer 3 Features
Static Route
VLAN Route
DHCP Server
AAA
Authentication Server RADIUS, TACACS+
Port Authorization
Management Account
RADIUS Attribute Assignment User Privilege, VLAN
Accounting
Multiple Server
Management
Web Interface HTTP, HTTPS
Command Line Interface Telnet, SSH v2
OpenVPN Client Certificate-based authentication
User Authentication Local Database, RADIUS, TACACS+
sFlow
SNMP v1, v2c, v3
Private MIB
RMON Group 1, 2, 3, 9
LLDP LLDP-MED, Media Endpoint Discovery Extension
Mail Alert Port Status, Port Speed, System Restart, IP Conflict
Syslog
2-Level Admin Privilege
Multiple Admin Accounts
Managed by VigorRouter SWM
Managed by VigorConnect
Managed by VigorACS 3
Config File Export/Import
Dual Image
SNTP (Simple Network Time Protocol)
Diagnostics Tools Port Mirroring, Ping, Cable Test, Fan Test
Physical
19-inch Rack Mountable Mouting Kit Included
Power Input AC 100-240V @ 6A
Max. Power Consumption 550 watts
Dimension (mm) 440(W) x 281(D) x 44(H)
Weight 4.3 kg (9.0 lb)
Ventilation Variable-speed Fan
Operating Temperature 0 to 50°C
Storage Temperature -20 to 70°C
Operating Humidity 10 to 90% non-condensing
Storage Humidity 5 to 90% non-condensing
Certificate CE FCC

 

Notes :

  • All specifications are subject to change without notice.
  • The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.

LAN Management

DrayTek provides an all-in-one management platform for Vigor devices on the LAN side.

Automatic Device Discovery

All you need is connect the VigorSwitch to the LAN side of the router, Vigor Router will then discover the devices to be managed.

Provisioning

Switch profile may be set on the Vigor Router. VLAN and scheduled ports control may be set and provision to the VigorSwitch remotely.

Monitoring

VigorRouter provides a hierarchical centralized view of managing devices, you may always check if the managed VigorSwitch is online and if there’s log and alert happens.

System Maintenance

You may perform a factory reset, save/restore a configuration backup, or trigger a remote reboot directly on the VigorRouter. There’s no need to log in to each device’s management page.

Management Solution

Software Management

Vigor Router-based APM

  • Auto-Discovery
  • Profile-based Auto-Provisioning
  • Monitoring
  • Centralized View
  • Remote VigorAP Maintenance
  • WiFi Client Load Balancing

VigorConnect

  • Auto-Discovery
  • Auto-Provisioning
  • Monitoring
  • Centralized Hierarchy View
  • Alarm
  • Reboot VigorAP Remotely
  • Scheduled Maintenance

VigorACS 3

  • Zero Touch Deployment & Provisioning
  • Auto VPN
  • Interface Quality & SLA
  • VoIP Optimization & Monitoring
  • Application Visibility
  • Customized Hotspot Page with Multilingual
  • Hotspot Clients Analytics
  • ACS Server Load Balancing / Failover

In-the-Box

VigorSwitch PQ2200xb

Rack Mount Kit

Console Cable

Power Cord

Quick Start Guide

Quick Inquiry Form

Thanks for your interest in DrayTek. Please take a few moments and fill as detailed as possible so we could serve you better.