- 48x PoE/PoE+ 10/100/1000Mbps Ethernet, RJ-45
- 6x 10G SFP+ 1000Mbps/10Gpbs fiber slot
- 216 Gbps Switching Capacity
- 256 VLANs
- Support RADIUS, TACACS+ Authentication Server
An Ideal Core Switch for SME/SMB
DrayTek VigorSwitch P2540x is a Layer 2+ Managed 10 Gbps switch. With 48x Gigabit Ethernet PoE+ ports providing 400W power budget and 6x SFP+ 10Gbps Fiber links. Supporting advanced Layer 3 features, DHCP Server and VLAN Routing, VigorSwitch P2540x improves network efficiency and helps your LAN network to work continuously even when the gateway is offline, which is ideal to be placed as the core switch in SME/SMB.
48x GbE
10/100/1000Mbps Ethernet, RJ-45
6x 10G SFP+
1000Mbps/10Gpbs fiber slot
216 Gbps
Switching Capacity
400 watts
of PoE Power Budget
- 1 Power Socket
- 2 Reset Button
- 3 LED Indicator
- 4 48x Gigabit Ethernet
- 5 6x SFP+ Port
- 6 Link/PoE LED Slide Switch
- 7 Console Port
Key Features
PoE (Power over Ethernet)
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
PoE Device Check
Enable Ping Watchdog for all PoE devices, if they lose their network connection, automatically restart them by a power cycle.
Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
ONVIF-Friendly
Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance.
Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch G2540x to route the inter-VLAN traffic directly and offload the router.
IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.
Access Control
VigorSwitch G2540x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
10G SFP+
Provides 10G-capable fiber SFP ports for aggregation or uplinking to the core switches.
QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
IPv6 Ready
VigorSwitch G2540x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
Web-Based GUI
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo
Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.
Central Switch Management
Set up VLAN easily from the router and get a centralized hierarchy view of the switches.
Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.
Advanced Layer 2+ Features
Improving LAN Network Sustainability and Efficiency,
with or without a Router
In a large LAN network, much traffic doesn’t go to Internet, but to the servers in LAN. For example, IP cameras store videos to NVR, IP phones register to PBX, clients access to file server, etc.
L2+ switch with DHCP server and VLAN routing functionalities, as the device receiving traffic before the router, is ideal to share the loading of your router and to help your LAN network to work continuously even when the router is offline.
As a DHCP server, VigorSwitch assigns dynamic IP addresses for up to 8 VLANs. With VLAN routing, VigorSwitch supports up to 512 routes.
Bind IP to MAC
Reserve an IP Address for an Important Device
As a DHCP Server, layer 2+ VigorSwitch helps reserving IP addresses for your important devices that most users will access frequently.
ONVIF-Friendly
Recognize the ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance.
Centralized Hierarchical View
VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.
Images Viewing
Images filmed by IP cameras can be viewed directly on VigorSwitch.
Device Management
Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.
ONVIF Snapshot Alert
Locating Not-Responding Cameras Made Easy
It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.
To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.
With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.
Interface | ||
---|---|---|
LAN Port | 48x 10/100/1000Mbps Ethernet, RJ-45 | |
6x 1000Mbps/10Gbps SFP+ | ||
Console Port | 1x RJ-45 | |
Button | 1x Factory Reset Button | |
PoE | ||
PoE Capable Ports | 48 | |
PoE Standards | PoE/PoE+(802.3af/802.3at), Type mode A | |
PoE Power Budget | 400 watts | |
Power Limit | ||
Scheduled On/Off | ||
Power Cycle on Port | Manual, Ping Watchdog | |
Capacity | ||
Buffer Size | 16 Mbit | |
Switching Capacity | 216 Gbps | |
Forwarding Rate | 160.7 Mpps (64 bytes) | |
MAC Address Table | 32k | |
Jumbo Frame | Up to 12 KB | |
L3 Routing Table | Max. 2k | |
Networking Standards | ||
IP Version | IPv4, IPv6 | |
Ethernet Standards | 802.3 10Base-T | |
802.3u 100Base-T | ||
802.3ab 1000Base-T | ||
IEEE802.3ae 10GBase-X | ||
802.3x Flow Control | ||
802.3 Auto-Negotiation | ||
802.1q Tag-based VLAN | ||
802.1p Class of Service | ||
802.1d STP | ||
802.1w RSTP | ||
802.1s MSTP | ||
802.3ad LACP | ||
802.1ad QinQ | ||
802.1x Port Access Control | ||
802.1AB LLDP | ||
802.3az EEE | ||
VLAN | ||
Max.Number of VLAN | 256 | |
VLAN Type | 802.1q Tag-based | |
MAC-based | ||
Protocol-Based | ||
Management VLAN | ||
Voice VLAN | ||
Surveillance VLAN | ||
802.1x Guest VLAN | ||
Port Isolation | ||
GVRP | ||
Q-in-Q | Basic | |
ONVIF Surveillance | ||
Discovery | ||
Surveillance Topology | ||
Real-Time Video Streaming | ||
ONVIF Device Maintenance | Device Info, Reset Factory Default, Time Settings, Reboot | |
QoS | ||
Number of QoS Queues | 8 | |
Queue Scheduling | SPQ, WRR | |
CoS (Class of Service) | 802.1p CoS, DSCP, CoS-DSCP, IP Precedence | |
Rate Limit & Shaping | ||
Security | ||
Access Control List | MAC, IPv4, IPv6 | |
Storm Control | Broadcast, Unknown Multicast, Unknown Unicast | |
DoS Defense | ||
802.1x Port Access Control | ||
IP Source Guard | ||
IP Conflict Detection | ||
IP Conflict Prevention | ||
Loop Protection | ||
Dynamic ARP Inspection | ||
DHCP Snooping with Option 82 | ||
Link Aggregation | ||
Max. Number of Group | 8 | |
Max. Number of Member in Each Group | 8 | |
Type | Static, LACP | |
Traffic Load Balancing | MAC Address, IP/MAC Address | |
Multicast | ||
IGMP Snooping | v2, v3 (BISS) | |
IGMP Querier | ||
MLD Snooping | v1, v2 (Basic) | |
Max. Number of Multicast Group | 256 | |
Group Throttling | ||
Group Filtering | ||
MVR (Multicast VLAN Registration) | ||
Layer 3 Features | ||
Static Route | ||
VLAN Route | ||
DHCP Server | ||
AAA | ||
Authentication Server | RADIUS, TACACS+ | |
Port Authorization | ||
Management Account | ||
RADIUS Attribute Assignment | User Privilege, VLAN | |
Accounting | ||
Multiple Server | ||
Management | ||
Web Interface | HTTP, HTTPS | |
Command Line Interface | Telnet, SSH v2 | |
OpenVPN Client | Certificate-based authentication | |
User Authentication | Local Database, RADIUS, TACACS+ | |
sFlow | ||
SNMP | v1, v2c, v3 | |
Private MIB | ||
RMON Group | 1, 2, 3, 9 | |
LLDP | LLDP-MED, Media Endpoint Discovery Extension | |
Mail Alert | Port Status, Port Speed, System Restart, IP Conflict | |
Syslog | ||
2-Level Admin Privilege | ||
Multiple Admin Accounts | ||
Managed by VigorRouter SWM | ||
Managed by VigorConnect | ||
Managed by VigorACS 2 | ||
Config File Export/Import | ||
Dual Image | ||
SNTP (Simple Network Time Protocol) | ||
Diagnostics Tools | Port Mirroring, Ping, Cable Test | |
Physical | ||
19-inch Rack Mountable | Mouting Kit Included | |
Power Input | AC 100-240V @ 2A | |
Max. Power Consumption | 52 watts | |
Dimension (mm) | 441(W) x 270(D) x 45(H) | |
Weight | 3.97 kg (8 lb) | |
Ventilation | Variable-speed Fan | |
Operating Temperature | 0 to 50°C | |
Storage Temperature | -20 to 70°C | |
Operating Humidity | 10 to 90% non-condensing | |
Storage Humidity | 5 to 90% non-condensing |
Notes :
- All specifications are subject to change without notice.
- The throughput figures are maximum, based on DrayTek internal testing with optimal conditions. The actual performance may vary depending on the different network conditions and applications activated.
Quick Inquiry Form
Thanks for your interest in DrayTek. Please take a few moments and fill as detailed as possible so we could serve you better.